Amplificator Bose PowerShare PS602P adaptable power amplifier

The PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.

Mai multe detalii

Bose PowerShare PS602P
Produs nou

7 711,00 lei

- +

Alerteaza-ma cand scade pretul

 
Mai multe detalii
  • POWER RATING
  • Amplifier Power 2 x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
  • Maximum Power per Channel 600 W @ 4-8 Ω, 70/100V
  • Gain (Low-Z mode) 44 dB, RCA (unbalanced) inputs; 32 dB, Euroblock (balanced) inputs
  • Gain (70V mode) 47 dB, RCA (unbalanced) inputs; 35 dB, Euroblock (balanced) inputs
  • Gain (100V mode) 50 dB, RCA (unbalanced) inputs; 38 dB, Euroblock (balanced) inputs
  • AUDIO PERFORMANCE
  • Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
  • Channel Separation (Crosstalk) > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
  • Signal to Noise Ratio 100 dB (at rated power, A-weighted)
  • AUDIO INPUTS
  • Input Channels 2 unbalanced, 2 balanced
  • Connectors Stereo RCA, XLR/TRS
  • Input Impedance 10 kΩ (RCA), 20 kΩ (XLR/TRS)
  • Maximum Input Level 20 dBu (at 12 dBu sensitivity setting)
  • Sensitivity -10 / -2 dBV, RCA inputs; 4 / 12 dBu, Euroblock inputs (low / high sensitivity)
  • AUDIO OUTPUTS
  • Outputs 2
  • Connectors NL4 & binding posts
  • INTEGRATED DSP
  • A/D and D/A Converters 24-bit / 48 kHz
  • Processing Functions Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity
  • inversion
  • Loudspeaker Presets Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108
  • Audio Latency < 1 ms (any input to speaker output)
  • INDICATORS AND CONTROLS
  • Power LED Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.
  • Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.
  • Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
  • Controls, Front Panel Power On/Off, Output Level Control
  • Controls, Rear Panel Amplifier mode DIP switches, loudspeaker EQ dials
  • ELECTRICAL
  • Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
  • AC Power Consumption 120 VAC: 14 W (Standby), 700 W (Max) 230 VAC: 14 W (Standby), 700 W (Max)
  • Mains Connector Standard IEC (C14)
  • Maximum Inrush Current 14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)
  • Protections High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
  • PHYSICAL
  • Dimensions (H x W x D) 44 mm x 483 mm x 414 mm (1.7” x 19.0” x 16.3”)
  • Shipping Weight 6.9 kg (15.3 lb)
  • Net Weight 5.5 kg (12.2 lb)
  • Cooling System Microprocessor controlled, variable speed fans, left to right air flow
  • GENERAL
  • Inputs (Control) USB input for configuring the amplifier with PowerShare Editor software. Mute input control.

Scrieţi o recenzie

Amplificator Bose PowerShare PS602P adaptable power amplifier

The PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.

Scrieţi o recenzie

 
Comments(0)

Nu sunt opinii ale clienților în acest moment.

Încă 30 produse în aceeași categorie:

Nu sunt produse

Se va calcula Livrare
0,00 lei Total

Finalizare