Anthem Statement P2, amplificator de putere stereo hi-fi

The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel

Mai multe detalii

Anthem Statement P2
Second Hand

Alerteaza-ma cand scade pretul

 
Mai multe detalii
  • Performance From The Heart
  • In life we admire “heart.” When we say someone has heart we mean passion, spirit, fortitude. And we applaud it. While the amplifier is the brawn behind every successful music and movie presentation, it is also the heart! Its role is as crucial as that of the speakers in its ability to render delicate musical detail one moment and deliver room-shaking explosions the next. The most exquisite piece of music falls flat without clean, quiet power to sustain it through to its natural, musical ebb. Movie special effects require an inordinate supply of stable, high current power to give visceral credibility to the “special” aspect of each effect! In fact, all truly successful sound reproduction requires “heart.” The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel; custom-designed convection-cooled heatsinks with serrated fins; a “no-fuse” design strategy. And the list goes on.
  • GENERAL
  • Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
  • Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
  • THD+N (225 W into 8 Ω) 0.0007% at 1 kHz, 0.008% at 20 kHz
  • IMD 0.00019% (CCIF, 325 W into 8 Ω)
  • POWER BANDWIDTH 10 Hz to 150 kHz
  • (+0 -3 dB, 325 W into 8 Ω)
  • FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
  • 5 Hz to 100 kHz (+0 -2 dB)
  • INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out
  • (100 W into 8 Ω)
  • INPUT IMPEDANCE 18 kΩ (RCA), 22 kΩ (XLR)
  • DAMPING FACTOR >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω)
  • S/N RATIO 125 dB, A-weighted (ref. 325 W)
  • CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz)
  • VOLTAGE GAIN 29 dB
  • SLEW RATE 40 V/µs
  • SWITCHES
  • Front Panel Power (On/Off)
  • Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)
  • POWER OUTPUT
  • (Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.)
  • Impedance 8Ω 4Ω 2Ω
  • # of Channels Driven 1 All 1 All 1 All
  • 325 W 325 W 500 W 500 W 675 W 675 WStatement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output.
  • POWER REQUIREMENTS
  • SUPPLY VOLTAGE 105 to 130 V, 60 Hz
  • POWER CONSUMPTION 1800 W
  • DIMENSIONS
  • Height 9-3/8 inches (23.8 cm) including feet
  • Width Faceplate 19-1/4 inches (49 cm)
  • Chassis 17-1/4 inches (43.8 cm)
  • Depth 22-1/2 inches (57.2 cm) including handles
  • Weight (unpacked) 75 lb (34 kg)

Scrieţi o recenzie

Anthem Statement P2, amplificator de putere stereo hi-fi

The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel

Scrieţi o recenzie

 
Comments(0)

Nu sunt opinii ale clienților în acest moment.

Încă 30 produse în aceeași categorie:

Nu sunt produse

Se va calcula Livrare
0,00 lei Total

Finalizare